{
  "pages": {
    "me": "帳戶",
    "clients": "用戶端",
    "admin": {
      "panel": "管理面板",
      "general": "一般設定",
      "config": "組態設定",
      "interface": "介面設定",
      "hooks": "Hook 設定",
      "warp": "WARP"
    }
  },
  "user": {
    "email": "電子郵件"
  },
  "me": {
    "currentPassword": "目前密碼",
    "enable2fa": "啟用兩步驟驗證",
    "enable2faDesc": "請使用您的驗證碼應用程式掃描 QR Code，或手動輸入金鑰。",
    "2faKey": "TOTP 金鑰",
    "2faCodeDesc": "請輸入驗證碼應用程式提供的驗證碼。",
    "disable2fa": "停用兩步驟驗證",
    "disable2faDesc": "請輸入您的密碼以停用兩步驟驗證。"
  },
  "general": {
    "name": "名稱",
    "username": "使用者名稱",
    "password": "密碼",
    "newPassword": "新密碼",
    "updatePassword": "更新密碼",
    "mtu": "MTU",
    "allowedIps": "允許的 IP",
    "dns": "DNS",
    "persistentKeepalive": "保持連線",
    "logout": "登出",
    "continue": "繼續",
    "host": "主機",
    "port": "連接埠",
    "yes": "是",
    "no": "否",
    "confirmPassword": "確認密碼",
    "loading": "正在載入...",
    "2fa": "兩步驟驗證",
    "2faCode": "TOTP 驗證碼"
  },
  "setup": {
    "welcome": "歡迎首次設定您的 PhobosWG",
    "welcomeDesc": "您已找到部署高可用 WireGuard 的最簡單方法",
    "existingSetup": "您已有現存的設定了嗎?",
    "createAdminDesc": "請先輸入管理員使用者名稱與高強度密碼。此資訊將用於登入管理面板。",
    "setupConfigDesc": "請輸入主機與連接埠資訊。此資訊將用於設定用戶端的 WireGuard 連線。",
    "setupMigrationDesc": "若要從先前的 wg-easy 版本移轉資料，請提供備份檔案。",
    "upload": "上傳",
    "migration": "還原備份:",
    "createAccount": "建立帳戶",
    "successful": "設定成功",
    "hostDesc": "用戶端將連線的公開主機名稱",
    "portDesc": "用戶端將連線的公開 UDP 連接埠，且 WireGuard 會在此監聽"
  },
  "theme": {
    "dark": "深色佈景主題",
    "light": "淺色佈景主題",
    "system": "系統佈景主題"
  },
  "layout": {
    "toggleCharts": "顯示/隱藏圖表",
    "donate": "贊助"
  },
  "login": {
    "signIn": "登入",
    "rememberMe": "記住我",
    "rememberMeDesc": "關閉瀏覽器後仍保持登入狀態",
    "2faRequired": "需要兩步驟驗證",
    "2faWrong": "兩步驟驗證碼不正確"
  },
  "client": {
    "empty": "尚無用戶端。",
    "newShort": "新增",
    "sort": "排序",
    "create": "建立用戶端",
    "created": "已建立用戶端",
    "new": "新增用戶端",
    "name": "名稱",
    "expireDate": "到期日",
    "expireDateDesc": "用戶端將被停用的日期。留白表示永久有效",
    "delete": "刪除",
    "deleteClient": "刪除用戶端",
    "deleteDialog1": "您確定要刪除",
    "deleteDialog2": "此動作無法復原。",
    "enabled": "啟用",
    "address": "位址",
    "serverAllowedIps": "伺服器允許的 IP",
    "permanent": "永久",
    "createdOn": "建立於 ",
    "lastSeen": "上次連線於 ",
    "totalDownload": "總下載量: ",
    "totalUpload": "總上傳量: ",
    "newClient": "新增用戶端",
    "disableClient": "停用用戶端",
    "enableClient": "啟用用戶端",
    "noPrivKey": "此用戶端沒有已知的私密金鑰，無法建立設定。",
    "showQR": "顯示 QR Code",
    "allowedIpsDesc": "將透過 VPN 路由的 IP (會覆寫全域設定)",
    "serverAllowedIpsDesc": "伺服器將路由至用戶端的 IP",
    "mtuDesc": "設定 VPN 通道的最大傳輸單位 (封包大小)",
    "persistentKeepaliveDesc": "Keep-alive 封包的間隔秒數。0 表示停用",
    "hooks": "Hook 設定",
    "hooksDescription": "Hook 設定僅適用於 wg-quick",
    "hooksLeaveEmpty": "僅適用於 wg-quick，否則請保持空白",
    "dnsDesc": "用戶端使用的 DNS 伺服器 (會覆寫全域設定)",
    "notConnected": "用戶端未連線",
    "endpoint": "端點",
    "endpointDesc": "用戶端建立 WireGuard 連線的來源 IP",
    "search": "搜尋用戶端...",
    "config": "組態設定",
    "viewConfig": "檢視組態設定",
    "firewallIps": "防火牆允許的 IP",
    "firewallIpsDesc": "此用戶端可存取的目標 IP/CIDR (由伺服器端強制執行)，留白則使用「允許的 IP」中的設定。支援選用的連接埠與協定篩選，語法請參閱說明文件。",
    "downloadPng": "下載 PNG",
    "copyInstallLink": "Copy install command",
    "installLinkCopied": "Install command copied to clipboard",
    "installLinkFailed": "Failed to generate install link",
    "downloadPackage": "Download install package"
  },
  "dialog": {
    "change": "變更",
    "cancel": "取消",
    "create": "建立"
  },
  "toast": {
    "success": "成功",
    "saved": "已儲存",
    "error": "錯誤",
    "unknown": "發生未知錯誤。請檢視主控台 (console) 以了解更多詳細資訊。"
  },
  "form": {
    "actions": "操作",
    "save": "儲存",
    "revert": "還原",
    "sectionGeneral": "一般設定",
    "sectionAdvanced": "進階設定",
    "noItems": "沒有項目",
    "nullNoItems": "沒有項目。使用全域設定",
    "add": "新增"
  },
  "admin": {
    "general": {
      "sessionTimeout": "工作階段逾時",
      "sessionTimeoutDesc": "「記住我」的工作階段持續時間 (秒)",
      "metrics": "計量",
      "metricsPassword": "密碼",
      "metricsPasswordDesc": "計量端點的 Bearer 密碼 (密碼或 argon2 雜湊)",
      "json": "JSON",
      "jsonDesc": "提供 JSON 格式計量的路由",
      "prometheus": "Prometheus",
      "prometheusDesc": "提供 Prometheus 計量的路由"
    },
    "config": {
      "connection": "連線",
      "hostDesc": "用戶端將連線的公開主機名稱 (變更後會使目前組態設定檔失效)",
      "portDesc": "用戶端將連線的公開 UDP 連接埠 (變更後會使目前組態設定檔失效，您可能也需要變更介面連接埠)",
      "allowedIpsDesc": "用戶端將使用的允許 IP (全域設定)",
      "dnsDesc": "用戶端將使用的 DNS 伺服器 (全域設定)",
      "mtuDesc": "用戶端使用的 MTU (僅適用於新用戶端)",
      "persistentKeepaliveDesc": "傳送 keepalive 的間隔秒數。以 0 表示停用 (僅適用於新用戶端)"
    },
    "interface": {
      "cidrSuccess": "已變更 CIDR",
      "device": "裝置",
      "deviceDesc": "用於轉送 WireGuard 流量的乙太網路裝置",
      "mtuDesc": "WireGuard 將使用的 MTU",
      "portDesc": "WireGuard 監聽的 UDP 連接埠 (您可能也需要變更連接埠組態設定檔)",
      "changeCidr": "變更 CIDR",
      "restart": "重新啟動介面",
      "restartDesc": "重新啟動 WireGuard 介面",
      "restartWarn": "您確定要重新啟動介面嗎? 所有用戶端將被中斷連線。",
      "restartSuccess": "介面已重新啟動",
      "firewall": "流量過濾",
      "firewallEnabled": "啟用個別用戶端防火牆",
      "firewallEnabledDesc": "使用 iptables 限制用戶端流量僅能存取特定 IP。啟用後，可針對每個用戶端設定其允許的存取範圍。",
      "egress": "出口",
      "egressWarp": "透過 WARP 路由用戶端流量",
      "egressWarpDesc": "啟用後，用戶端透過 Cloudflare WARP 而非伺服器 WAN 存取網際網路，隱藏伺服器 IP。需要已註冊的 WARP 設定。可能需要降低用戶端 MTU。"
    },
    "introText": "歡迎使用管理面板。\n\n您可在此管理一般、組態、介面與 Hook 設定。\n\n請從側邊欄選擇任一項目開始。",
    "warp": {
      "title": "Cloudflare WARP",
      "intro": "註冊免費的 Cloudflare WARP 帳號，將其用作用戶端的出口。用戶端將使用 Cloudflare IP 而非伺服器 IP 存取網際網路。",
      "register": "取得 WARP",
      "registerSuccess": "WARP 已註冊",
      "status": "狀態",
      "deviceId": "裝置 ID",
      "addressV4": "IPv4 位址",
      "addressV6": "IPv6 位址",
      "endpoint": "端點",
      "license": "WARP+ 授權",
      "licenseKey": "授權金鑰",
      "licenseKeyDesc": "輸入 WARP+ 授權金鑰以啟用 WARP+。",
      "licenseSet": "已設定授權",
      "licenseUnset": "無授權",
      "licenseSuccess": "授權已套用",
      "applyLicense": "套用授權",
      "autoRotate": "自動輪換 IP",
      "intervalDays": "間隔（天）",
      "intervalDaysDesc": "0 表示停用。自動輪換 WARP IP。",
      "changeIp": "更換 IP",
      "changeIpSuccess": "WARP IP 已更換",
      "delete": "刪除 WARP",
      "deleteSuccess": "WARP 設定已刪除",
      "importConfig": "編輯設定",
      "importTitle": "手動 WARP 設定",
      "importDesc": "貼上 WireGuard 設定。系統將測試連線——握手成功後設定將被儲存。Table、PostUp 和 PostDown 由系統自動管理，無需填寫。",
      "importApply": "套用",
      "importSuccess": "WARP 設定已套用",
      "connection": "連線",
      "online": "在線",
      "offline": "離線",
      "checkNow": "檢查連線",
      "checking": "檢查中…",
      "checkOnline": "WARP 在線",
      "checkOffline": "WARP 離線",
      "notActiveEgress": "WARP 未作為出口啟用",
      "notActiveEgressTip": "在「網路介面」部分啟用「透過 WARP 路由用戶端流量」，即可使用並測試 WARP 通道。"
    }
  },
  "zod": {
    "generic": {
      "required": "{0} 為必填項目",
      "validNumber": "{0} 必須為有效的數字",
      "validNumberRange": "{0} 必須為有效的數字或範圍",
      "validString": "{0} 必須為有效的字串",
      "validBoolean": "{0} 必須為有效的布林值",
      "validArray": "{0} 必須為有效的陣列",
      "stringMin": "{0} 至少需要 {1} 個字元",
      "numberMin": "{0} 不能小於 {1}"
    },
    "client": {
      "id": "用戶端 ID",
      "name": "名稱",
      "expiresAt": "到期時間",
      "address4": "IPv4 位址",
      "address6": "IPv6 位址",
      "serverAllowedIps": "伺服器允許的 IP",
      "firewallIps": "防火牆允許的 IP",
      "firewallIpsInvalid": "防火牆 IP 格式無效。請參閱說明文件以了解支援的語法。"
    },
    "user": {
      "username": "使用者名稱",
      "password": "密碼",
      "remember": "記住我",
      "name": "名稱",
      "email": "電子郵件",
      "emailInvalid": "電子郵件格式無效",
      "passwordMatch": "密碼必須一致",
      "totpEnable": "啟用 TOTP",
      "totpEnableTrue": "必須啟用 TOTP",
      "totpCode": "TOTP 驗證碼"
    },
    "userConfig": {
      "host": "主機"
    },
    "general": {
      "sessionTimeout": "工作階段逾時",
      "metricsEnabled": "計量",
      "metricsPassword": "計量密碼"
    },
    "interface": {
      "cidr": "CIDR",
      "device": "裝置",
      "cidrValid": "CIDR 格式無效",
      "egressMode": "出口模式",
      "domainValid": "Domain must be a valid hostname"
    },
    "stringMalformed": "字串格式錯誤",
    "body": "Body 必須為有效的物件",
    "hook": "Hook",
    "enabled": "啟用",
    "mtu": "MTU",
    "port": "連接埠",
    "persistentKeepalive": "保持連線",
    "address": "IP 位址",
    "dns": "DNS",
    "allowedIps": "允許的 IP",
    "file": "檔案",
    "installLink": {
      "token": "Install token"
    },
    "obfuscator": {
      "extPort": "Obfuscator external port",
      "key": "Obfuscator key",
      "masking": "Masking mode",
      "idle": "Obfuscator idle timeout",
      "dummy": "Max dummy bytes",
      "publicIpV4": "Server public IPv4",
      "publicIpV6": "Server public IPv6",
      "clientWgLocalPort": "Client local WG port"
    },
    "warp": {
      "addressV4": "IPv4 位址",
      "addressV6": "IPv6 位址",
      "endpoint": "端點（主機:連接埠）",
      "interval": "更新間隔（天）",
      "key": "WireGuard 金鑰",
      "license": "WARP+ 授權金鑰（最少 26 個字元）"
    }
  },
  "hooks": {
    "preUp": "PreUp",
    "postUp": "PostUp",
    "preDown": "PreDown",
    "postDown": "PostDown"
  },
  "copy": {
    "notSupported": "無法複製",
    "copied": "已複製!",
    "failed": "複製失敗",
    "copy": "複製"
  }
}